Innovation starts with the right equipment.
We love to create. And our innovation comes not only in the way we build, but also the equipment we use. With a variety of state-of-the-art machining equipment including a CNC Burning Table, we’re able to provide outstanding value for our customers – delivering the finest end products possible with the highest precision.
Press Brakes
80 ton x 8 ft. | 180 ton x 12 ft. | 750 ton x 12 ft. | 1000 ton x 20 ft. | 1500 ton x 23 ft.
1000 ton Press Brake
Our staff bending 3/4” thick 28” ID pipe saddle in our 1000 ton brake!
Kucher Steels can form most high tensile strength material, including hardox, QT, AR, Chrome Molly and Algotuf 400F
Need a quote?

Whatever your project, however, tight your production deadline, Kucher Steels is well equipped to meet the challenge.

Shears
1/4 in. Thickness x 12 ft.
1/2 in. Thickness x 20 ft.
Plate Rolls
3 in. x 3.5 ft. (tight dia.) | 3/8 in. x 8 ft. | 3/4 in. 8 ft. | 3 in. x 12 ft.
1-1/4" x 10 ft. , 1-1/2" x 5 ft
CNC BURNING TABLE
24′ x 40′ effective cutting area. Two oxy-fuel torches, 400 amp contour beveling plasma, 200 amp high definition plasma, 40 amp arc writer
10’ x 25’ plasma cuts up to 2.25" thick. Contouring bevel plasma. 50-400 amp, pin and stamp unit for marking heat numbers.
Oxy Fuel Plasma Table
Our Oxy Fuel Plasma Table has new slats and is ready to get to work!
We can mechanically stamp and bevel whatever you might require and our plasma oxy/fuel machines can handle plates up to 10" thick.
Need metal forming in Edmonton?
